Bookkeeping Exercises
Menu

Cleanup and reconciliation

Opening balances: starting books for an existing business

Set opening balances for a business that is already running, from choosing a conversion date to the opening entry and clearing Opening balance equity.

By TNas · · 8 min read

To start books for a business that already exists, choose a conversion date, build a trial balance of every asset, liability and equity account as of the day before it, and enter those balances as one opening entry. Then load the detail behind the totals (open invoices, unpaid bills, uncleared bank items) so the new books reconcile from day one. When you're finished, a temporary account called Opening balance equity should be at zero.

What opening balances are

Opening balances are the amounts each account holds on the first day the new books are used. A new business starts at zero, but an existing one already has cash in the bank, customers who owe it money, equipment, loans and bills to pay. The new books must start from those figures or every report will be wrong.

Only balance sheet accounts carry balances from one year to the next. Revenue, expense and drawings accounts are temporary accounts: they are closed at year-end and start the next year at zero. That's why the timing of the switch matters so much.

Step 1: choose the conversion date

The conversion date is the first day the new books record transactions. Everything before it lives in the old records; everything from that day on goes in the new books.

The easiest date is the first day of a fiscal year, such as January 1. On that date the prior year has been closed, so only permanent accounts have balances. As OpenStax explains for the post-closing trial balance, after closing the only accounts with balances are permanent accounts. That list is exactly what you need to enter.

Conversion date What you must enter Trade-off
First day of the fiscal year Balance sheet accounts only Simplest; may mean re-entering a few months if you start late
First day of a quarter or month Balance sheet accounts plus year-to-date revenue and expenses Faster to start; year-end reports need the year-to-date figures
Today, mid-month Not recommended Splits a month between two systems and complicates the bank reconciliation

If you switch mid-year, enter year-to-date totals for each revenue and expense account too, so the full-year income statement is complete. Without them, the year's net income only covers the months in the new books.

Step 2: gather and reconcile the prior records

Opening balances are only as good as the records they come from. Before you enter anything, make sure the old figures are right as of the day before the conversion date. Gather:

  • Bank and credit card statements for the last month before conversion, with a completed bank reconciliation.
  • A list of open customer invoices (who owes what, by invoice).
  • A list of unpaid supplier bills.
  • Loan statements showing principal balances.
  • A fixed asset list with original cost and depreciation to date.
  • Payroll and sales tax liabilities still owed.
  • The last tax return or year-end statements, if a tax preparer made them.

IRS Publication 583 lists supporting documents such as sales slips, paid bills, invoices, receipts, deposit slips and canceled checks. Those are the papers that back each opening balance. Keep the prior records too. The IRS page on how long to keep records says to generally keep property records until the period of limitations expires for the year you dispose of the property. For equipment, that can be many years.

If the old books are months behind, catch them up first. The guide on catch-up bookkeeping covers that work.

Step 3: build the opening trial balance

List every balance sheet account with its balance on the day before the conversion date, debits in one column and credits in the other. This is your opening trial balance. It must balance before you enter it.

Maple Street Cleaning is a fictional sole proprietorship moving from a spreadsheet to accounting software on January 1, 2026. Its balances at December 31, 2025:

Account Debit Credit Source
Cash 8,400.00 Reconciled book balance
Accounts receivable 3,250.00 Three open invoices
Supplies 540.00 Year-end count
Equipment 12,000.00 Fixed asset list, cost
Accumulated depreciation 4,800.00 Fixed asset list
Accounts payable 1,150.00 Two unpaid bills
Notes payable 5,000.00 Lender statement
Owner Capital 13,240.00 Balancing figure, checked below
Totals 24,190.00 24,190.00

Owner Capital is the difference between assets and liabilities. Assets are $8,400 + $3,250 + $540 + $12,000 − $4,800 = $19,390. Liabilities are $1,150 + $5,000 = $6,150. Equity is $19,390 − $6,150 = $13,240. If the old records include an owner's equity figure, compare it. A big gap means one of the other balances is wrong, not that capital should be forced.

Note that accumulated depreciation is entered separately from equipment cost, not netted. That keeps the fixed asset history intact for future depreciation.

Step 4: post the opening entry

Enter the trial balance as one compound entry dated the day before the conversion date:

Journal entry
AccountDebitCredit
December 31, 2025: opening balances for Maple Street Cleaning
Cash$8,400.00
Accounts Receivable$3,250.00
Supplies$540.00
Equipment$12,000.00
Accumulated Depreciation$4,800.00
Accounts Payable$1,150.00
Notes Payable$5,000.00
Owner Capital$13,240.00

Debits total $24,190 and credits total $24,190. After posting, run a balance sheet as of December 31, 2025 and compare it line by line with the table above.

How the details change the entry

Accounting software usually tracks receivables by customer and payables by supplier, in a subledger that must agree with the control account. A single opening entry to Accounts receivable doesn't tell the software who owes what. So in software you usually enter the detail instead: each open invoice, each unpaid bill and each uncleared bank item, as described next, with the remaining balances entered one by one. Each item's other side goes to a setup account (Step 6), and the software builds the control balances from the detail. Use one method or the other, never both, or receivables, payables and cash will be counted twice.

Step 5: load open invoices, bills and bank items

Open customer invoices

Enter each unpaid invoice with its original date and amount, so payments can be applied to it. The trap: a normal invoice posts a credit to revenue. If the old invoice's revenue was already counted in 2025, recording it again in 2026 double counts it. Date it before the conversion date, or set the invoice line to post to an opening balance account rather than to revenue. The three Maple Street invoices total $3,250, which must equal the Accounts receivable line.

Unpaid supplier bills

Bills work the same way in reverse. Enter each with its original date, posting the expense side to an opening balance account rather than to an expense, so 2025 costs don't land in 2026. The two bills total $1,150.

The bank balance and uncleared items

Maple Street's December bank statement shows $9,100, but a $700 check (#1043) hadn't cleared. The reconciled book balance is $9,100 − $700 = $8,400.

Enter the bank statement balance of $9,100 as the opening balance, then enter check #1043 for $700 dated in December, with its other side also posted to the setup account (the payment's cost was already counted in 2025). The book balance becomes $8,400, and when the check clears in January, you can tick it off in the first reconciliation. If you instead enter $8,400 with no detail, the January reconciliation will be off by $700 when the check clears. The outstanding check glossary entry explains why.

Loans and fixed assets

Agree each loan to the lender's principal balance on the conversion date. The guide to reconciling a loan balance shows what to do when they differ. For equipment, record cost and accumulated depreciation for each asset (or asset group) so depreciation can continue on schedule. The straight-line depreciation lesson covers the calculation.

Step 6: clear Opening balance equity

Most accounting programs post the other side of each opening balance, open invoice or bill to an account called Opening balance equity when you don't specify one. That keeps every entry balanced during setup. Once all balances are entered, the account's total should equal the business's real equity, ready to move to owner's capital.

For Maple Street, entering each balance separately would leave Opening balance equity with a $13,240 credit, the same figure as the owner's capital in the trial balance. After checking every balance against its source, close it out:

Journal entry
AccountDebitCredit
January 1, 2026: move verified opening equity to owner's capital
Opening Balance Equity$13,240.00
Owner Capital$13,240.00

If the Opening balance equity total doesn't match the equity you expected, don't move it yet. Run the account's detail and compare each line to the opening trial balance. The usual culprits are:

Symptom Likely cause
Off by an uncleared check or deposit Bank opening balance entered as the book figure plus the items again
Off by the receivables total Open invoices entered and an opening receivables balance entered too
Off by depreciation Equipment entered at net book value, with accumulated depreciation also entered
Off by a small odd amount A typo; test whether the difference divides by 9

The post on why a balance sheet doesn't balance has more ways to read the size of a difference.

Step 7: prove the opening balances

Before you record the first new transaction, check four things:

  1. The balance sheet as of the day before conversion matches the opening trial balance, account by account.
  2. The receivables and payables aging reports match the open invoice and bill lists.
  3. Opening balance equity is zero.
  4. The income statement for the new period shows nothing yet (or only year-to-date totals if you converted mid-year).

Lock or close the period before the conversion date if your software allows it, so no one changes opening balances by accident. The controls and corrections lesson explains why closed periods matter.

Frequently asked questions

Can I use the bank balance as the cash opening balance?

Use the reconciled book balance, entered as the statement balance plus each uncleared item. The statement balance alone ignores checks and deposits still in transit.

What if I don't know the original cost of old equipment?

Look for purchase invoices, prior depreciation schedules or the last tax return. If the records are incomplete, ask the business's accountant or tax preparer, because the cost affects depreciation and any future gain or loss.

Should the owner's capital match the last tax return?

Not always, since tax and book figures can differ. Use the tax return as a check, and ask the tax preparer about large differences.

For organizations without owners, equity works differently; see nonprofit bookkeeping basics.

What to practice next

Opening balances are really a balance sheet skill: knowing which accounts are permanent and making them balance. Practice with the balance sheet exercises, then sharpen your difference-hunting with the trial balance error exercises.

Sources

  1. Publication 583, Starting a Business and Keeping Records — IRS
  2. How long should I keep records? — IRS
  3. 5.2 Prepare a Post-Closing Trial Balance — OpenStax

Educational content for US small-business bookkeeping, not tax, legal or accounting advice. Example businesses and figures are fictional. See our editorial policy for how we write and correct content.